.100 2.54 .200 5.08 .118 3.00 5.08 .200 2x .100 2.54 a .004[0.10] .004[0.10] a .004[0.10] a a 1.50 5x 1.17 .059 2.05 .081 2x .181 4.60 .046 2x .157 4.00 psm date drawn customer .xxxx [x.xxx] .xxxx er21346 ggr date er7845 description b rev 11/27/07 r. fazio date approved 11/27/07 m.ayub date approved 11/27/07 c revised per jc 01/15/07 angles: 2 scale: 2:1 drawing revised per approved date 01/15/10 jpc by cwb appd per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] cwb 04/24/08 c 75 ohm with housing ronics rev 1 sht of a lec SD373-010-6141G t din right angle plug wallingford, connecticut 06492 w inches t er e winchester electronics corporation 62 barnes industrial road north 1 catalog p/n: 373-010-6141g notes: unless otherwise specified 1. for general series specifications, see sd37-0000. 2. material specifications: connector: bodies: brass per astm b16 retaining ring and co ntact: copper alloy insulators: teflon per astm d1710 housing: high temperature th ermoplastic. material: sabic uf0067w-nc (white color) and clariant cny02655 colorant. 3. connector finish specifications: rear body: .000015 min gold per astm b488 over .000080 min nickel per ams-qqn-290 (rohs) front body and contacts: .000030 min gold per astm b488 over .000080 min nickel per ams-qqn-290 (rohs) retaining ring: .000005 min gold per astm b488 over .000080 min nickel per ams-qqn-290 (rohs) connector housing .748 19.00 .488 12.38
|